Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 4 of 4
  1. #1

    TL-MR6400 - IKEv2 VPN - Clients connect but not traffic

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    I have an operational IKEv2 VPN implemented with Strongswan.

    The VPN works well, however with the newly purchased TL-MR6400 clients can establish a VPN but traffic doesn't seem to route through.

    I have tested the following combinations:

    1. Sim card A, TL-MR6040, IPSec Passthrough - Enabled - No traffic
    2. Sim card A, huawei mifi - Works
    3. Sim card A, TL-MR6040, IPSec Passthrough - Enabled - No traffic
    4. Sim card B, huawei mifi - Works
    5. Sim card A, TL-MR6040, IPSec Passthrough - Disabled - No connection at all

    In scenario 1. above I am able to ping the VPN's public gateway address but nothing else.

    The network of Sim card A is Vodafone (Australia).

    The network address reported in TL-MR6400 status page is something like
    The network address reported in the VPN server (of the client, ie TL-MR6400) is (Hasn't changed in 3 reconnects).

    Firmware version is 1.012 Build 160322 Rel.33912n
    Hardware version is MR6400 v1 00000000

    Let me know if I can specify any further details.


  2. #2
    Model: TL-MR6400
    Hardware version:
    1.0.12 Build 160322 Rel.33912n
    Firmware version:
    MR6400 v1 00000000
    ISP: Orange (LU), Bouygues Telecom, Swisscom


    I've the same symptoms. IKEv2 VPN connects but no
    passthrough(expect ping).
    Settings at "Security" >> "Basic Security" have no effect on data traffic in tunnel.

    This problem seems to be very similar to the MR200:
    - http://forum.tp-link.com/showthread.php?95980-Archer-MR200-Cisco-AnyConnect-passthrough
    - http://forum.tp-link.com/showthread.php?94393-problem-with-vpn-passthrough-in-Archer-MR200

    It will be great from TP-Link that the little brother of the MR200: the MR6400 could also get a beta firmware correcting this bug.


  3. #3
    Junior Member Sw3r is on a distinguished road
    Join Date
    Apr 2017
    It's crazy, i have a same problem on thegreebow IKEV1. The tunnel is up but it's not possible send traffic on the VPN. HELPPPPP

  4. #4

    Good news: it also exists a beta (old) firmware for the TL-MR6400. I recently got a link from TP-Link support.
    This beta firmware upgrade (beta
    2016-09-06 15.01.35) solved my VPN (IKEv1/IKEv2) passthrough problems.

    My advice is to continue requesting support from TP-Link using their website (http://www.tp-link.com/support-contact.html#E-mail-Support), you might also be lucky.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.