TL-MR6400 - IKEv2 VPN - Clients connect but not traffic
Hardware Version :
Firmware Version :
ISP : [/COLOR]
I have an operational IKEv2 VPN implemented with Strongswan.
The VPN works well, however with the newly purchased TL-MR6400 clients can establish a VPN but traffic doesn't seem to route through.
I have tested the following combinations:
1. Sim card A, TL-MR6040, IPSec Passthrough - Enabled - No traffic
2. Sim card A, huawei mifi - Works
3. Sim card A, TL-MR6040, IPSec Passthrough - Enabled - No traffic
4. Sim card B, huawei mifi - Works
5. Sim card A, TL-MR6040, IPSec Passthrough - Disabled - No connection at all
In scenario 1. above I am able to ping the VPN's public gateway address but nothing else.
The network of Sim card A is Vodafone (Australia).
The network address reported in TL-MR6400 status page is something like 10.16.91.42.
The network address reported in the VPN server (of the client, ie TL-MR6400) is 126.96.36.199 (Hasn't changed in 3 reconnects).
Firmware version is 1.012 Build 160322 Rel.33912n
Hardware version is MR6400 v1 00000000
Let me know if I can specify any further details.
Hardware version: 1.0.12 Build 160322 Rel.33912n
Firmware version: MR6400 v1 00000000
ISP: Orange (LU), Bouygues Telecom, Swisscom
I've the same symptoms. IKEv2 VPN connects but no passthrough(expect ping).
Settings at "Security" >> "Basic Security" have no effect on data traffic in tunnel.
This problem seems to be very similar to the MR200:
It will be great from TP-Link that the little brother of the MR200: the MR6400 could also get a beta firmware correcting this bug.
It's crazy, i have a same problem on thegreebow IKEV1. The tunnel is up but it's not possible send traffic on the VPN. HELPPPPP
Tags for this Thread