Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 4 of 4
  1. #1

    TDW8901G unable to access admin page

    Model :

    Hardware Version : Not Clear

    Firmware Version : 6

    ISP : [/COLOR]

    i have tp-link adsl wireless modem TDW8901G. im unable to access admin page if more then tow people connecting to the internet nor from telnet or web browser.

  2. #2
    Banned jimasek is on a distinguished road
    Join Date
    Jan 2013
    Disable UPnP

  3. #3
    The TD-W8901G may be getting overloaded especially if one or both clients are using p2p software like utorrent. Disabling UPnP can decrease the chance of p2p and other heavy connection overloading low-end routers like the TD-W8901G so it's worth a try.

    The firmware on the TD-W8901G may have an issue that was resolved in a later firmware. Upgrade the TD-W8901G to the latest firmware available from the TP-LINK site for your hardware revision, reset the TD-W8901G's settings and configure it again.
    I am not affiliated with TP-LINK.

    Just an Australian that likes playing with technology, finding issues and solving them if possible and helping others when I can.

  4. #4

    reset TDW8901G with method 1

    I had same problem and I used method 1 of the following link and I fixed my problem:



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.