Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 6 of 6
  1. #1

    Sporadic issues with UH700

    Model :

    Hardware Version : Not Clear

    Firmware Version :

    ISP : [/COLOR]

    My USB hub is having sporadic issues recognizing devices. One moment it recognizes a 128 GB USB 3.0 flash drive and not a 64 GB 3.0 flash drive, and then it will stop recognizing the 128 GB and recognize the 64 GB. There doesn't seem to be any rhyme or reason to which devices it will recognize and which it won't. The combined amperage of four flash disks, one two external USB 2 hard disks should be under the 8 amp limit, so I'm not sure what else is wrong. All of the devices work fine when plugged directly into a computer and bypassing the TP-Link USB hub. However it does recognize devices in seemingly random situations, so it's not like it is completely dead.

    Not sure what to do.

  2. #2

    Sporadic issues with UH700

    Well it seems fbinst wont work on win9x and I dont know of any other program that would work like that. Does any of you know of such a program?

  3. #3

    Sporadic issues with UH700

    Ok, can I use this with win98? If so, may I please get the instructions for that? If you say "just get XP" etc. or something, fine, get this working for me under win98 and I can/will. as long as my flash drive size isnt too limited in size as a result

  4. #4

    Sporadic issues with UH700

    dont you have access to any other system or may be a pe available so that you can boot from it and use fbinst from there ? that pe got to be xp or 2k3 based.

  5. #5
    Quote Originally Posted by ettobias View Post
    Model :

    Hardware Version : Not Clear

    Firmware Version :

    ISP : [/COLOR]

    My USB hub is having sporadic issues recognizing devices. One moment it recognizes a 128 GB USB 3.0 flash drive and not a 64 GB 3.0 flash drive, and then it will stop recognizing the 128 GB and recognize the 64 GB. There doesn't seem to be any rhyme or reason to which devices it will recognize and which it won't. The combined amperage of four flash disks, one two external USB 2 hard disks should be under the 8 amp limit, so I'm not sure what else is wrong. All of the devices work fine when plugged directly into a computer and bypassing the TP-Link USB hub. However it does recognize devices in seemingly random situations, so it's not like it is completely dead.

    Not sure what to do.
    I have a new UH700 and I'm having the same problems. I have connected 4 external hard drives 3 WD and 1 Seagate and it sometimes do not recognizes 1-3 of them, sometimes it does... I don't know how to resolve this. Any ideas? Windows 10 Pro x64

  6. #6
    Switching to another USB port on the computer and letting it to re-install helped. Upsetting for a USB hub which is supposed to be there for USB port ease...


 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.