Region : UnitedStates
Model : TL-ER6120
Hardware Version : V1
Firmware Version : 1.2.3 Build 140801 Rel.49374n
ISP : Comcast and Verizon
Hello, I just purchased 2 TL-R600VPN Routers and configured them for IpSec. Both can access the internet. Router A is the main office and Router be is a remote, small office. I set them up per instructions found on the Forum and also from the manual. The settings mirror each other and I do not see anything wrong with the configuration.
Router A, at the main office, has ports open for exchange and Activesync. Email is working fine, my first question is do I need to open ports for the VPN to work. On both routers>? On Router A at the main office?
I cannot find a screenshot or anything that explains how to setup 2 TL-R600's for IpSec. They usually show one TL-R600 with another model. Can anyone point me to a screenshot for setting up 2 TL-R600's please.
I get the error couldn't find configuration on the main site.
couldn't find configuration. initiate new phase 1 negotiation: XX.XX=IP<=>XX.=IP couldn't find configuration. IPsec enabled
couldn't find configuration. phase2 negotiation failed due to time up waiting for phase1. ESP XX.XXIP->XX.XXIP ISAKMP-SA deleted XX.XX=IP-XX=IP spi:b017c06f1943ef05:0000000000000000
couldn't find configuration. isakmp_newcookie 2505 Get 16 bytes from urandom. isakmp_newcookie 2499 Get no bytes from random,try /dev/urandom. initiate new phase 1 negotiation: XX.XXIP<=>XX.XXIP phase2 negotiation failed due to time up waiting for phase1. ESP XX.XX.XX.XX->XX.XX.XX.XX ISAKMP-SA deleted XX.XX.XX.XX-XX.XX.XX.XX3 spi:bf8f9623d87f34d5:0000000000000000
Does anyone know why I cannot get a tunnel to connect I really have to get this working.. somehow.. I disabled, enabled, re-edited the settings, checked them 10 times.. everything looks good.. is it a port not opened? Firmware and hardware are latest version and both match. password is the same.. Settings are matched correctly.. any ideas anyone?