Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 5 of 5
  1. #1

    Question How to block access to Internet by MAC address

    Region : UnitedKingdom

    Model : TL-SG3216

    Hardware Version : V1

    Firmware Version : 2.1.2 Build 20140311 Rel.56575

    ISP :


    I've just bought and connected my SG3216, and so far so good. I have my ISP's router connected to Port 1. What I would like to do is to be able to block specific MAC address(es) from accessing the Internet (Port 1). Before I bought the switch I did read over the manual and with my limited understanding I assumed I could do this.

    However, now I have the hardware in front of me I'm confused as to how it should be done, assuming it is even possible! If anyone can help me out I would really appreciate your help.


  2. #2
    Members Ada is on a distinguished road
    Join Date
    Oct 2012
    Access control cannot make it??

  3. #3
    Hello Ada,

    Thank you for the reply. I am sure that the Access Control could do what I need I just lack the understanding in how to configure it.

    So if you, or any other member could assist me with the steps I need to implement this that would would be very useful.


  4. #4

    [Solved] How to block access to Internet by MAC address


    OK, I've implemented this now by following the FAQ ID 402 and applying the logic to MAC based ACL.


  5. #5

    Alguien me puede ayudar a aprender a configurar un Switch TL-SG3216 en español desde 0.....Gracias


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright © 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.