Configure routing on R470T+

[ChunniePark]

thank you, I tried it and success. Thank you so much

[foxy]

I'm using TP-R470T+ (with 12 Mbps cable modem as wan1 and 6 Mbps ADSL+ as wan2) and I have no problem configuring certain IP to specific WAN (got the guide from http://www.tp-link.com/en/faq-530.html) . Problem is; I have VPN connection (I use hamachi; www.logmein.com) and I want my VPN to use wan2 because apparently the connection to my office (and other VPN clients) is faster because other VPN member also use the same ISP (the ADSL+ isp).

Question: How to configure the router to separate VPN connection with other connection from the same IP ?

Looking forward to hearing from you guys...

Thanks.

[Manishslg]

I have 3 WANS active on my RL-R470T+

I have set up that inbound ip's from 192.168.3.101 to 192.168.3.149, all protocols and all destinations to use WAN1 but they keep using WAN2 and WAN3 simultaneously despite wan1 being active and working. Any help appreciated. manishslg@gmail.com

Image 1 here shows the routing being done for WAN1



Image 2 and 3 showing that despite that policy, Wan2 and WAn3 are being used by these Inbound ips

[Mr.J]

I'm also having some difficulties trying to route my WANs 192.168.0.1 . do you have any solution?

Please refer to FAQ 530. http://www.tp-link.com/en/faq-530.html

[anirudhashish]

I have 3 WANS active on my RL-R470T+

I have set up that inbound ip's from 192.168.3.101 to 192.168.3.149, all protocols and all destinations to use WAN1 but they keep using WAN2 and WAN3 simultaneously despite wan1 being active and working. Any help appreciated. manishslg@gmail.com
Attachment 3452
Image 1 here shows the routing being done for WAN1

Attachment 3450

Image 2 and 3 showing that despite that policy, Wan2 and WAn3 are being used by these Inbound ips
Attachment 3451Attachment 3452

IP1>>WAN1

but IP2 will still use WAN1 so you must put in two rules... IP1 WAN1 & IP2 WAN2 . (In case thats how u want it...)

[john88]

Thank for info.

holiday palace
ทางเข้า sbobet