Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 3 of 3

Thread: POE question

  1. #1

    POE question

    Region : Australia

    Model : TL-SF1008P

    Hardware Version : Not Clear

    Firmware Version :

    ISP :


    I was looking for details about TL-WR743ND, nor the manual neither the specification page and not even in the FAQs tells anything about POE regulaltions.

    This is are my questions:

    This device uses a 9v dc adaptor that plugs to the injector, *IT IS POSIBLE TO USE A POE SWITCH INSTEAD?*

    24v pasive poe or 48v ? *

    Why it doesnt says if its *802.3af? or something

    PLEASE ENLIGHT ME WITH POE and VOLTS REQUIREMENTS, THANKS.

  2. #2
    First I would like to tell you*the TL-WR743ND supports for Passive PoE when it is in WISP mode.
    *
    You can not change the Passive PoE to a PoE switch with different Voltage*because the voltage should be the same as the power adapter. And as the router uses Passive PoE instead of the stardard PoE, it*doesn't support 802.3af.

  3. #3
    thank you all for your answers.
    *
    I understand a little more now.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.