Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Junior Member CCTVTech is on a distinguished road
    Join Date
    Apr 2018
    Posts
    1

    Can I isolate 2 networks coming in on the same cable into the same port?

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    A client has the Jetstream 24 port POE switch. There are 2 different types of devices on the same SINGLE cable coming to the POE switch. but with different IP ranges. Is there any way to isolate them? I only want access through the switch to one range of IPs, or specific IPs if possible? I dont want anything but those to have access to other devices on the switch. Is this possible?

    Thanks.

  2. #2
    Members R1D2 is on a distinguished road
    Join Date
    Dec 2015
    Posts
    1,638
    See the section about 802.1q VLANs in the user's guide, it's the way to isolate subnets. However, the switch/router on the other end of the cable needs to support VLANs, too.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.