Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 3 of 3
  1. #1

    IPv6 traffic T2600G-28TS

    Model : T2600G-28TS

    Hardware Version : 2.0

    Firmware Version : 2.0.0 Build 20170527 Rel.31275(s)

    ISP : [/COLOR]

    Ever since I've put my internet traffic in pvid 50 and vlan 50 the IPv6 traffic is not passing through anymore, is there something I'm supposed to do?

    Multicast is on forwarding

    Name:  Selectie_080.png
Views: 0
Size:  23.2 KB

    And port config is on

    Name:  Selectie_081.png
Views: 0
Size:  15.7 KB

  2. #2
    After you configure LAG, all Layer 2 feature will generate an entry of LAG, include VLAN, STP, IGMP Snooping and so on.
    I think you can check the configuration of VLAN.
    You also need to click the LAGS on the top of the list.

    The entries in the LAGS list have the high priority.

  3. #3
    No the vlan is active on the lag interfaces.

    Name:  Selectie_084.png
Views: 0
Size:  19.0 KB

    Not quite sure what you're refering to when you're talking about the high priority

    Also STP is not configured it's just default

    Name:  Selectie_085.png
Views: 0
Size:  17.8 KB
    Last edited by Ofloo; 04-02-2018 at 17:06.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.