Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1

    configuring my TL-SG105 switch network

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hi everyone!

    I just started research and I'm having problems setting up a local network for controlling a robot arm
    My idea is this: Name:  IMG_1459.jpg
Views: 0
Size:  36.2 KB
    I would love to set up a local network between the computer and the robot arm while still be able to go online on the computer.
    The robot has a static IP address and subnet mask setup already.
    How should I do it?

    thanks!
    Terry

  2. #2
    Members R1D2 is on a distinguished road
    Join Date
    Dec 2015
    Posts
    1,635
    I assume that the IP of the robot arm is in a different subnet, right? If so, you could use another virtual network interface on top of the physical interface on your Linux box to be able to reach both, your router's subnet and the robot arm's subnet. Search the web for how to setup virtual interface on Linux.
    Last edited by R1D2; 03-15-2018 at 13:24.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.