Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 6 of 6
  1. #1

    Bug tl-er604w - the route created by vpn not deleted automatic

    Model : TL-ER604W

    Hardware Version : TL-ER604W v2.0

    Firmware Version : 1.2.0 Build 20160825 Rel.45880s

    ISP : [/COLOR]

    My scenario, I have two sites (point A and point B) and I need to connect both.


    I have two links to connect this sites, first link is a mpls (point to point, I dont have internet) and secondy link is a VPN through internet. They work using FailOver. The VPN is not active, only will active if mpls is down.


    I have configured router in "mode classic":
    - enable two WAN (WAN1 mpls and WAN2 internet)
    - enable failover (primary Wan1 and backup Wan2)
    - create static route to point B access network in point A by mpls
    - create access rule allow point A to access LAN in point B
    - create VPN IKE IPsec Site-to-Site by Wan2
    - configure online detection to Wan1 verify if mpls is online.


    This scenario is perfect and mpls is online and Wan2 is down. When I turnoff mpls, Wan1 disable, Wan2 enable, VPN connect, it creates automatic route to access point A and work like a charm. When mpls return there is the problem: VPN disconnect, Wan2 is down, Wan1 is online, ok, but the route was created by vpn is not deleted. So, the mpls route not works.


    This route need to be deleted, interface Wan2 is down, I cannot have any route to Wan2. This may be a bug. Could you help us?
    Last edited by Daniel Vaz; 03-01-2018 at 14:38.

  2. #2
    As far as I'm concerned, IPsec VPN will not form any route entry when established. What do you mean the route here, could you show as screenshot?

  3. #3
    I agree with you, follow the attached screenshot. In this case, the route was deleted because I click in inactive, but, if failover is enable and primary link return automatic, the vpn will down and not delete route entry.

    Images a and b => vpn connect in WAN2 and route entry created
    a)Name:  bug er604_a.jpg
Views: 0
Size:  54.6 KB
    b)Name:  bug er604_b.jpg
Views: 0
Size:  59.3 KB

    Images c and d => vpn disconnect and route entry deleted
    c)Name:  bug er604_c.jpg
Views: 0
Size:  51.7 KB
    d)Name:  bug er604_d.jpg
Views: 0
Size:  57.4 KB

    Thanks
    Last edited by Daniel Vaz; 03-14-2018 at 18:48.

  4. #4
    The screenshots are vague and I think you'd better contact tplink support.

  5. #5
    What image do you want to see? the imagens show vpn online and route table with route created and show vpn offline without route entry

    How can I contact tplink support?

    Can you take a router and configure the vpn to validate info?

  6. #6
    Quote Originally Posted by Daniel Vaz View Post
    What image do you want to see? the imagens show vpn online and route table with route created and show vpn offline without route entry

    How can I contact tplink support?

    Can you take a router and configure the vpn to validate info?
    I want to know the route entry that VPN connection creates. And the relationship with the VPN connection..But your screenshots are vague and I cannot see clearly.


 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.