Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Junior Member bernardobudnik is on a distinguished road
    Join Date
    Feb 2018

    Question Bridge between two cpe510

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hello, I would like to know if someone did something like in the diagram, I do not know if it is the correct way, I have a client halfway with good reception and I would like to put an antenna so that my most remote clients can connect to that antenna. I use TP-LINK Pharos CPE510. If someone did, tell me your solution.

    Name:  Esquema Puente.png
Views: 0
Size:  60.7 KB

  2. #2
    Members R1D2 is on a distinguished road
    Join Date
    Dec 2015
    Works this way, but you should run the CPE connecting to the leftmost AP in Client mode, not in Bridge mode (it's still working as a bridge or more precisely, as a relay station in RF terminology).

    But note that latest CPE510 don't have a LAN1 port anymore. If you manage to get v1.1 hardware, they have a second LAN1 port and the setup is possible as shown in your picture.

    With v2 hardware you can't use PoE Passthrough on the two CPEs connected by wire, so you will have to use a switch to connect AP2 and CL1 to the CPE.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.