Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Junior Member beboscky@yahoo.it is on a distinguished road
    Join Date
    Feb 2018
    Posts
    1

    CPE 210 re-configure

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hi,
    I have configured my cpe 210 as a client, dynamic IP, wpa2 enterprise encryption. It works, connects to the internet. Once configured it losts connection of the web configuration interface after a while. it's impossible to re-access to 192.168.0.254. To edit configuration I have to reset and re-configure it. Firmware 2.1.6. Any solution?
    Thanks

  2. #2
    When it's configured with dynamic IP, the router will assign an IP for CPE210 randomly.
    It's no longer 192.168.0.254.
    For better management and easy access to CPE210's web page, you'd better configure a static IP within the same subnet of your router.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.