Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1

    Access to T2600G from WAN

    Model : T2600G-28TS

    Hardware Version : T2600G-28TS 2.0

    Firmware Version : 2.0.0 Build 20170527 Rel.31275(s)

    ISP : [/COLOR]

    Hello,

    can you please help me to allow remote access to t2600g from wan?
    The only way to have access at this moment, is via a terminal in the same subnet.

    In other models it could be done via remote access - allow icmp
    how can this be done in this model?

    thank you in advance
    Last edited by couroskom; 02-05-2018 at 13:04.

  2. #2
    Members TPTHZ is on a distinguished road
    Join Date
    Aug 2017
    Posts
    150
    Quote Originally Posted by couroskom View Post
    Model : T2600G-28TS

    Hardware Version : T2600G-28TS 2.0

    Firmware Version : 2.0.0 Build 20170527 Rel.31275(s)
    ISP : [/COLOR]

    Hello,

    can you please help me to allow remote access to t2600g from wan?
    The only way to have access at this moment, is via a terminal in the same subnet.

    In other models it could be done via remote access - allow icmp
    how can this be done in this model?

    thank you in advance
    You only need configure default gateway in T2600G, then configure virtual server in your router.
    If you do not know how to configure default gateway in T2600G, you can check the FAQ as below:
    http://www.tp-link.com/en/faq-1126.html


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.