Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 3 of 3
  1. #1

    HS105 Smart Plug Local Only - Remote Access Intermittent

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    I have 5 smart plugs set up - 2 HS100's and 3 HS105's. All 5 work perfectly on local wifi but the 3 HS105's can only be accessed intermittently on remote cellular connection. All 5 plugs were set up using the IOS Kasa app on my iPhone without a problem. I am currently using an Asus RT-N66R router and have assigned static IP addresses to each plug. I have tried uninstalling, factory resetting, and re-installing the plugs to no avail. I have also rebooted the router several times with no success. The issue appears to be related to the firewall because if I turn off the firewall, the 3 HS105's work perfectly on remote access. Since I don't want to keep the firewall off, is there a solution for this problem?

  2. #2
    Update hs105; set hs105 as DMZ hosts then turn on firewall.

  3. #3
    Am I understanding this correctly, you're recommending the HS105 be configured to run outside of the firewall in the DMZ? That sounds very risky.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.