Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 1 of 1
  1. #1

    Lightbulb Configuration Guide for Managing EAPs via EAP Controller

    The EAP provides specialized functions for maintenance and management. Users cancentrally monitor and manage the EAPs via EAP Controller’s management interface.The EAP Controller is a management software for TP-Link EAP devices. The free EAP

    Controller software allows users to manage hundreds of EAPs not only when they are in the same network segment but also in different network segments.Configuration procedures differ depending on the network topology. The various scenarios can be listed as

    follows:

    ■ Managing EAPs in the Same Subnet

    ■ Managing EAPs in Different Subnets

    ● Managing EAPs at the Same Site

    a. Using Discovery Utility to Discover EAPs

    b. Using DHCP Option 138 to Discover EAPs

    ● Managing EAPs at Different Sites

    a. Using Discovery Utility to Discover EAPs via VPN Tunnel

    b. Using DHCP Option 138 to Discover EAPs via VPN Tunnel

    c. Using Discovery Utility to Discover EAPs via NAT Port Forwarding

    d. Using DHCP Option 138 to Discover EAPs via NAT Port Forwarding

    For more information, please read the guide: ★★★Configuration Guide for Managing EAPs via EAP Controller★★★
    Last edited by TP-Link_Document; 02-11-2018 at 03:23.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.