Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Junior Member Andruzzo is on a distinguished road
    Join Date
    Jan 2018
    Posts
    1

    LB100 - what happens when i cut power to the lightbulb??

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    I have an LB100 connected and working.But when i turn off the bulb with the wall switch or there is a powerFailure...it doesn't seem to reconnect after I restore power or turn on The wall switch? Is it supposed to reconnect or do i need to reconfigure again??

  2. #2
    It should reconnect (and will usually turn on). It might not be working well, another power cycle might do it or you may need to reposition it or your router. Or it may have connected but has received a new IP from your router, if your phone is connected to your 5GHz band in a dual band router it may not be able to find the bulb as it connects to the 2.4GHz band. You might try enabling remote access and/or connecting your phone to the 2.4GHz band.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.