Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1

    T2600G-28TS and T2600G-52TS - Pre-Purchase Questions

    I have a few questions about the T2600G-28TS and T2600G-52TS before buying.

    1. Can copper RJ45 optics be used in the SFP ports? Like this SFP -> https://www.amazon.ca/dp/B072J2RBHG/...0LUFIJY3&psc=1

    2. Is it possible to secure each port to a single or select number of MAC addresses? To stop people from disconnecting workstations, connecting a dumb switch and connecting personal devices.

    3. With regards to SNMP are the interface counters 64-bit?

    I did check the manuals and found a bit related to question 2, but I just want to be totally sure before buying.
    Last edited by SirMaple; 01-19-2018 at 11:06.

  2. #2
    Members TPTHZ is on a distinguished road
    Join Date
    Aug 2017
    Posts
    150
    Quote Originally Posted by SirMaple View Post
    I have a few questions about the T2600G-28TS and T2600G-52TS before buying.

    1. Can copper RJ45 optics be used in the SFP ports? Like this SFP -> https://www.amazon.ca/dp/B072J2RBHG/...0LUFIJY3&psc=1

    2. Is it possible to secure each port to a single or select number of MAC addresses? To stop people from disconnecting workstations, connecting a dumb switch and connecting personal devices.

    3. With regards to SNMP are the interface counters 64-bit?

    I did check the manuals and found a bit related to question 2, but I just want to be totally sure before buying.
    For the 1st question, I do not know. In principle, it is ok.
    For the 2nd question, You can configure port security.
    For the 3rd question, In my opinion, you need ask tp-link directly.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.