Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 7 of 7
  1. #1

    TL-PA9020 (EU) V 1.0 - Powerline failure

    Model :

    TL-PA9020P


    Hardware Version : 1.0

    Firmware Version :

    3.2.4._902111_170118_901


    ISP : [/COLOR]

    Hi,

    I upgraded my powerline network from 2 TL-PA 8030 (worked with no failure for years) to 4 TL-PA9020P, which worked fine for the first 3 weeks, but now I face a lot of powerline network failures.
    I changed nothing on my powerlines nor on the router settings.

    Firmware on all 4 devices: 3.2.4._902111_170118_901

    Any ideas?
    Last edited by Unicross71; 01-17-2018 at 21:04.

  2. #2
    Okay, so far no ideas at all as I see...
    Disappointing.

    What else beside new pairing of the devices could be done to ensure stable powerline connection?

    What are the differences between Hardware version 1.0 to 3.0?

  3. #3
    Junior Member sbwilson is on a distinguished road
    Join Date
    Feb 2018
    Posts
    1
    i am experiencing exactly the same issues since moving to 3 x TL-PA9020P. I have noticed that the failure always appears to come from the adapter that my router is plugged into. This issue occurs every few days (each week of so), requiring the powerline adapter switching off and on in order to reset and cure. Firmware is 3.2.4._902111_170628_901.

  4. #4
    Junior Member carlitos is on a distinguished road
    Join Date
    Feb 2018
    Posts
    1
    same disconnection problem. 2 x TL-PA9020(EU), 1 x TL-PA9020(EU) 1 x TL WPA9610(EU) This issue occurs every few days (each week of so), requiring the powerline adapter switching off and on in order to reset and cure.

    Firmware's :
    TL PA9020(EU) v1 3.2.4_902011_170703_903
    TL PA9020P(EU) v1 3.2.4_902111_170118_901
    TL PA9020P(EU) v1 3.2.4_902111_170118_901
    TL WPA9610(EU) v1 3.2.4_961011_161105_903

  5. #5
    Same here too, middle led is stable red or flashes red when status disconnected/connect failure accurs...every 1-3 weeks or so...only power reset helps...this came with latest firmware as i can remember...read older threads here on board...no one has contact to TP-Link support?? very disappointing situation, because these are the fastest powerline adapters i know...

  6. #6
    @carlitos: Latest firmware for 9020P V1 EU is: TL-PA9020P KIT(EU)_V1_170628 (3.2.4_902011_170628)...No one has newer one? from "other countries" perhaps? really annoying failure...

  7. #7
    In parallel to the Forum I contacted via email the TP-Link Technical Support something like two weeks ago.
    As I never reveived any answer I asume they are still caught in a Problem solving Brainstorming Meeting.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.