Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 7 of 7

Thread: Cpe210

  1. #1

    Cpe210

    Model : CPE210

    Hardware Version : V2

    Firmware Version :
    2.1.6 Build 20170908 Rel. 45234 (4555)



    ISP : [/COLOR]

    Hi everyone, first say sorry for my bad english.

    2 days ago (10/01/2018) I bought TP-Link CPE210, all ok, like I wanted, Im very happy with the product.

    The problem is: I use the product to connect to the public wireless of my town hall, and I get -67dBm of signal, but... sometimes (many times...) the signal ups to -79dBm (and It stays fixed, consequently, I lose internet speed MB, 20MB --> 6-7MB) and to recover the -67dBm (and my 20MB) I have to restart the antenna, and then I get the -67dBm, summarizing... the antenna lost power or something similar...

    There is any solution to my problem?

    Thank you!!
    Last edited by CDiazF; 01-22-2018 at 15:29.

  2. #2
    Lo primero actualiza el firmware del cpe http://www.tp-link.com/de/download/C....html#Firmware dos ajusta la distancia de la antena al ap para el tiempo que tarda la señal. SURTE

  3. #3
    How far is the town hall away from the CPE210? what mode did you configure on CPE210?
    There must be many wifi interferences around. Especially for 2.4G.

  4. #4
    Quote Originally Posted by LORENZO AR View Post
    Lo primero actualiza el firmware del cpe http://www.tp-link.com/de/download/C....html#Firmware dos ajusta la distancia de la antena al ap para el tiempo que tarda la señal. SURTE
    Buenas, tengo la última version del firmware:

    Firmware Version:


    2.1.6 Build 20170908 Rel. 45234 (4555)



    Lo segundo, ya tengo la distancia ajustada que son unos 100m aprox. (0.1km en la antena.)

    Gracias!

  5. #5
    To the first question: 100 meters approximately. I configured it in "AP Client Router" mode, other modes haven't what I want. Yes there are a lot of wireless networks, about 20... but... I had other device (which doesn't work anymore) and that device didn't give me this problem. Im happy with the CPE but I have this annoying problem.

  6. #6
    Quote Originally Posted by Carat1 View Post
    How far is the town hall away from the CPE210? what mode did you configure on CPE210?
    There must be many wifi interferences around. Especially for 2.4G.
    To the first question: 100 meters approximately. I configured it in "AP Client Router" mode, other modes haven't what I want. Yes there are a lot of wireless networks, about 20... but... I had other device (which doesn't work anymore) and that device didn't give me this problem. Im happy with the CPE but I have this annoying problem.

  7. #7
    Quote Originally Posted by LORENZO AR View Post
    Lo primero actualiza el firmware del cpe http://www.tp-link.com/de/download/C....html#Firmware dos ajusta la distancia de la antena al ap para el tiempo que tarda la señal. SURTE
    Hola, tengo la ultima version del firmware (2.1.6 Build 20170908 Rel. 45234 (4555), y tambien configuré la distancia entre la antena y el ap del wifi publico, unos 100 metros (0.1km en la antena)


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright © 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.