Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 3 of 3

Hybrid View

  1. #1

    Archer D7 Firmware issues

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    I bought TWO Archer D7 routers for the purpose of extending a wifi network.

    I have had a number of problems so I am starting over from scratch.

    One of the D7's has firmware V1.0 on the label the other has firmware V1.1

    So question 1 is what is the difference in hardware terms between these two routers, I noticed that the V1.0 does NOT have
    holes for wall attachment, but what I really need to know is whether firmware from TP Link site improves things.

    To add confusion when I log into the admin screen of the V1.0 router it is has the more modern GUI portal while the V1.1 router
    has a typical sort portal with options down the left hand side rather than large icons etc.

    The V1.0 router lists the firmware as

    Version 1.6.0 0.9.1 v002d.0 Build 160216 Rel.57110n Hardware Version: Archer D7 v1 00000002

    While the V1.1 router lists the firmware as

    Version 0.9.1 0.9 v002d.0 Build 141014 Rel.51158n Hardware Version: Archer D7 v1 00000000

    To me there seems to be something wrong with the V1-1 router, how can the Hardware Version be v1 00000000

    Should I suspect that someone has changed the internal hardware of this Router?

    I was considering upgrading the built but I imagine this will not change the kit and I have had such
    bad experiences with TP-Link firmware turning routers into bricks despite following all the instructions properly.

    I have found the latest firmware for this router to be

    Archer_D7(EU)_V1_160216

    Which seems to match the Build 160216 of the V1-0 router

    Does anyone know if I will lose anything by upgrading the V1-1 router to Build 160216 ?

    Or am I better off leaving them as they are?

  2. #2
    TPLink often upgrade their hardware when their number changed, such as v1 to v2.
    I do not know what is a v1.1 version, maybe only in firmware?

    You can try to upgrade, if the firmware for V1 is not accepted by V1.1, it should shows Error Code 4503. and do not let you upgrade instead of break your router----which sounds a fool bug.

  3. #3
    I think the routers commonly known as V2 had V1-1 on the label.

    The V1.1 box had holes in case for wall mounting, otherwise they look the same.

    You are right, I have had two TP Link routers that were ruined in a firmware upgrade that was not interrupted,


 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.