Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 3 of 3
  1. #1

    Can I change the wifi channel? (RE200 AC750)

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hello there!

    Is it possible to change the channel through which a given wifi is repeated? or does the repeater automatically "emits" the wifi in the same the channel that the host wifi uses?

    Cannot seem to find the option to change the channel, so I guess its the second case... Thanks in advance guys!

  2. #2
    I have the same question. I am repeating a 2.4ghz signal but RE200 extended it to another channel which is very busy. On the advanced configuration page we do not have the option to select the wifi channel.

  3. #3
    Hello @Javielfo. I did some tests and i found this:
    If you are talking about 2,4Ghz band when you connect to 5Ghz and the repeater extend 2.4 Ghz. It will automatically use a different channel that your currently 2.4Ghz band is.
    For example:
    Case 1: You have a Dual band router (Channel 36 and 11) and connect the repeater to 5Ghz, The repeater will extend the signal on channel 1 or 6.
    Case 2: You have a Dual band router (Channel 36 and 11) and connect the repeater to 2.4Ghz. The repeater will extend the signal on channel same channel 11.

    Unfortunately i can't find how to change the channel manually on RE200. If anyone knows it. please let us know.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.