Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 5 of 5
  1. #1

    Problem with specific dimmer. I do not know how this is possible but I have verified it three times

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]


    Just bought this product the other day, love it so far. I went crazy and bought them for all around the house and ran into a big problem. The lights dont work when its only the LB130/100 series on my dimmer!


    I have the LB130 and LB100 lights.
    I have from 3 to 6 in series on a single dimmer. [Ceiling lights]

    The dimmer is the :
    https://www.amazon.com/Lutron-MA-100...mg_top?ie=UTF8

    When I have a single or more non LB130/LB100 light bulb in the series everything is fine.
    When I have only LB130/LB100 light bulbs in the series, the lights do not come on.

    Do i have to replace the dimmer or is there another work around?

    Thanks,
    Greg

  2. #2
    The LBxxx series are wifi connected bulbs where you would control brightness through TP Link's app. Generally you would not use them with a dimmer switch. I'd expect you'd run into trouble when you tried to dim them if the power supplied to them moved of spec. If you have a dimmer switch there already it's better to use regular dimming bulbs there as they're quite a bit cheaper... Use your LBxxx bulbs where you do not have a dimmer and want smart bulb behavior (remote control, brightness, scheduling, etc). Another option is to replace the dimmer switch with an ordinary switch.

  3. #3
    "When I have a single or more non LB130/LB100 light bulb in the series everything is fine.
    When I have only LB130/LB100 light bulbs in the series, the lights do not come on."

    How do you explain that?

    The only option is to leave one of the non led bulbs in which is not ideal!


  4. #4
    While it's an interesting effect I'm not sure I'd spend much time trying to explain it . AFAIK the LBxxx bulbs are NOT intended to be dimmed using an older type dimmer switch. You asked whether you need to replace the dimmer switch, the answer is "yes". And you asked if there's another workaround, again the answer is yes - use bulbs intended to work with a dimmer.

  5. #5
    Quote Originally Posted by MikeP_AutomationManager View Post
    While it's an interesting effect I'm not sure I'd spend much time trying to explain it . AFAIK the LBxxx bulbs are NOT intended to be dimmed using an older type dimmer switch. You asked whether you need to replace the dimmer switch, the answer is "yes". And you asked if there's another workaround, again the answer is yes - use bulbs intended to work with a dimmer.
    i have many of these dimmer switches in my house - is there an option without having to replace the dimmers everywhere?


 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.