Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Junior Member pewe1835 is on a distinguished road
    Join Date
    Dec 2017

    TP-Link TL-SG1008PE limited to 100 MBit/s

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]


    I have installed a TL-ST1008PE, it works fine so far. Only problem is, that the bandwith is limited to 100 MBit/s at each port. If I connected my PC directly to the modem I got 400 MBit/s, if I use the switch in between the bandwith is limited. Is there anything I can do?


  2. #2
    Members R1D2 is on a distinguished road
    Join Date
    Dec 2015
    The TL-SG1008PE is a Gigabit switch. If auto-negotiation sets the ports to 100 Mbit/s mode, it is almost certainly caused by a bad cable, e.g. by using UTP cables instead of S/FTP cables.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.