Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Junior Member muriuki is on a distinguished road
    Join Date
    Dec 2017
    Posts
    1

    connecting cpe 210 with ip cctv

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    hi am connecting ip cctv using cpe 210 on an open field 14 pcs.
    the cctv are 3 mega pixel.
    i only see 3 of them in the nvr but i can ping all the others.

  2. #2
    1. Make sure your 14 cameras, CPE210 and NVR are set up in the same subnet as the router.
    2. If you have the cameras, wireless radios, and NVR set to specific ip addresses to work with your router's ip address scheme, NVR still cant will find them, you can also use the manual add function to add ip cameras on the NVR if its auto discovery function does not find the cameras.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.