Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1

    TL-SG108E won't allow me to connect to administer any settings

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    I tried the web interface first, 192.168.0.1 and get "This site canít be reached 192.168.0.1 took too long to respond." Nmap shows nothing active on that IP address either.

    Then i installed the software for it, tried that way. It detects the switch, but when i try and login, I get the "Host IP address and switch IP address must be on the same subnet" message.


    So, how do I actually get into the switch?

  2. #2
    Members TPTHZ is on a distinguished road
    Join Date
    Aug 2017
    Posts
    160
    Quote Originally Posted by dantose View Post
    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    I tried the web interface first, 192.168.0.1 and get "This site can’t be reached 192.168.0.1 took too long to respond." Nmap shows nothing active on that IP address either.

    Then i installed the software for it, tried that way. It detects the switch, but when i try and login, I get the "Host IP address and switch IP address must be on the same subnet" message.


    So, how do I actually get into the switch?
    The IP address of your computer and TL-SG108E shuold be configured in same network segment. You can reset TL-SG108E via reset button firstly. Then configure IP address of your computer as 192.168.0.X.
    Then try to use web interface and Utility to access TL-SG108E.

    PS: TL-SG108E V1.0 do not support utility.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright © 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.