Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1

    TL-SG1016PE powering CPE210

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hi,

    I try to power a TL-CPE210 Accesspoint with one of the PoE ports of TL-SG1016PE, but this does not work.

    The CPE210 works with the power injector T240100-2-PoE. The CPE210 is my only PoE device, so I cannot test with others.

    It this a general incompatibility, or just a configuration thing? The SG1016PE is in factory default (just changed the IP).
    If this is a incompatibility, which switch I have to use to power CPE210?

    The fan is running all the time. Is this normal, or is there a possibility to run the fan only if necessary?

    Thanks
    Martin

  2. #2
    Members R1D2 is on a distinguished road
    Join Date
    Dec 2015
    Posts
    1,643
    The CPEs need 24 volts passive PoE, not 802.3af PoE (48 volts). An injector for passive PoE is included with each CPE, just use this adapter.


 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.