Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 4 of 4
  1. #1

    How to get over a hill outdoors? Will two EAP110's do this for me?

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Would like to get 2.4gHz over a hill outdoors? Will two EAP110's do this for me?
    If not, which TP product(s) will?

    I would need to use browser interface to set up (Mac).

    thanks

  2. #2
    More details about your environment would help understand better. Like how far is it between the two locations? and between them is there a hill? And what's the height differences between the hill and two locations.

    of up to 200 metrs


  3. #3

    hill

    thanks carat.house on one side of hill, eave mount point about 10-15' below peak of hill where other AP mount could be.other sides of hill need signal at 10-40' below peak.minimal trees or obstructions.just looking for sporadic web access for 2 users so we don't eat up our cellular data plans which we use now.thanks

  4. #4
    Members R1D2 is on a distinguished road
    Join Date
    Dec 2015
    Posts
    1,127
    Difficult to give recommendations if you don't provide enough details such as the exact location (latitude, longitude), distance of both houses etc.

    For example, if the following matches your location, there is no change to get over the hill except to either place a relay on top of the hill or to go around the hill. In the latter case, you could probably get around the hill with only one additional device as a relay station, but to tell wether this would work, the angle needs to be calculated. You need at least to ensure a free LoS in the 1st fresnel zone with a 60% clearance below:

    Name:  hill.png
Views: 0
Size:  238.4 KB


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.