Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 3 of 3
  1. #1

    EAP Controller shows Disconnected TP Link AP

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hi,
    any way to reconnect my EAP220 and 225 Name:  EAP220Disconnection.png
Views: 0
Size:  38.3 KBAPs in my EAP controller? Somehow it just disconnected and I tried to replugin the AP.

  2. #2
    Try forget all and reconnect according to UG.
    Attached Images    

  3. #3
    Members R1D2 is on a distinguished road
    Join Date
    Dec 2015
    Posts
    1,127
    It's probably worth mentioning that a disconnected EAP will not be reset to factory defaults if you forget it while it's still disconnected. The username/password of the EAP assigned by the controller will still be in place if they re-connect, so you have to enter it again if adopting. To keep settings in sync, I would recommend to just re-connect the EAPs. If they are becoming disconnected all at once, almost certainly the link between the EAPs and the server running the controller had been lost.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.