Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 7 of 7
  1. #1

    Discconnect VPN after hours.....

    Model : TL-ER6020 & TL-R 600

    Hardware Version : 1

    Firmware Version : last

    ISP : [/COLOR]

    Hi @all

    i use TL-ER6020 to an TL-R 600 with VPN

    the TL-ER6020 have a Static IP and the TL-ER6020 a Dyndns

    after IP-Change from the DSL (TL-R 600) in the night the TL-ER6020 are NOT reconnect to the TL-R 600

    only work after VPN - IPSec - General > Enabled / Disabled then reconnect the VPN.

    Every day the same problem only work when i change manually


    thx in advance

  2. #2
    Which VPN service you are using...??
    Last edited by MKGhandi; 10-30-2017 at 14:19.

  3. #3
    i don't understand ..... the VPN can only IPsec

  4. #4
    Quote Originally Posted by upware View Post
    i don't understand ..... the VPN can only IPsec
    I was asking because sometimes a USA VPN does not support the router you are using. So you you have to contact the customer support to mitigate the issue.
    But TP link routers are sync able with almost every vpn in the market.

  5. #5
    Members Panda is on a distinguished road
    Join Date
    Aug 2016
    Posts
    109
    Have you check if the ER6020 update the IP correctlly?

  6. #6
    No i have not. This router has a built in vpn. You can not install another vpn on it that is for sure.

  7. #7
    Members Mr.J is on a distinguished road
    Join Date
    Aug 2016
    Posts
    117
    Please make sure the internet connection is stable. It's important.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.