Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Page 7 of 9 FirstFirst ... 5 6 7 8 9 LastLast
Results 91 to 105 of 132
  1. #91
    Quote Originally Posted by gostaekman View Post
    does anybody have a link to a beta firmware for the ac1200 v2? Can't get any response from tplink.
    +1 ac1200 v2 eu

  2. #92
    Same with me. No answer from TP Link support since 6 days. Anyone can share the firmware? AC1200 v2 EU

    Thanks in advance

  3. #93
    new FW for C1200(US)2.0,seemed to solve the problem。
    http://www.tp-link.com/us/download/A....html#Firmware

  4. #94
    Same issue since few weeks using V1 (EU), with a very old FW (missed a couple of updates). Starting to get very very very annoying so I am very happy to know I am not alone. Hope the new working firmware will be ported to other countries and other versions!

  5. #95
    There is no firmware version for C1200 v2 EU?

  6. #96
    I have received the TP LINK support reply today.

    Here are the beta versions for download:

    The beta firmware for Archer C1200 hardware version 1 can be found here: http://support.tp-link.com/f/83ec721f22/?dl=1.

    The beta firmware for Archer C1200 hardware version 2 can be found here: http://support.tp-link.com/f/afccc09878/?dl=1.

    Regarding firmware upgrade procedure:
    IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
    Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. Normally V1.x=V1
    Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
    Do NOT upgrade the firmware through wireless connection unless there is no LAN/Ethernet port on the TP-link device.

  7. #97
    you tried to restore and configuration again?you should create a backup file.

  8. #98
    I'm testing the new release from the official page and so far the router is working fine.
    http://static.tp-link.com/2018/20180..._V2_180103.zip

  9. #99
    So what about V3? Is there a firmware update for V3 yet? Both V1 and V2 have official updates on the website, but nothing yet for V3.

    If it's forthcoming very soon, I'll wait. Otherwise, I need to move on with my life and replace these (I have two C1200 V3s).

  10. #100
    I've got hardware version 3(US) and have been running a new version of the firmware that I got from support about 9 days ago. It is running pretty much flawlessly. Contact support for a new firmware version if you are having these problems.

  11. #101
    Quote Originally Posted by polesoft View Post
    I'm testing the new release from the official page and so far the router is working fine.
    http://static.tp-link.com/2018/20180..._V2_180103.zip
    If I have the EU version will the US version also work?
    On the official TP Link page there is no update for EU version yet...

  12. #102
    I bought C1200 four days ago. First two days it was working great. Now I had to reboot it twice, yesterday and today.
    Before I bought this router I googled it, but not enough.
    I have that C1200 v2 EU version. I updated that beta version of 2.0.1 software. Tomorrow I will see that, if this software is working better.
    Let's hope that release version of software will available soon.
    Last edited by salosa; 01-07-2018 at 11:36.

  13. #103
    Quote Originally Posted by salosa View Post
    I have that C1200 v2 EU version. I updated that beta version of 2.0.1 software. Tomorrow I will see that, if this software is working better.
    Let's hope that release version of software will available soon.
    Where did you find that beta?

    Wneh I try to update to the new US firmware I get an error... My router is v. 1
    Last edited by Denver; 01-07-2018 at 10:43.

  14. #104
    Here,

    Quote Originally Posted by hhnn View Post
    I have received the TP LINK support reply today.

    Here are the beta versions for download:

    The beta firmware for Archer C1200 hardware version 1 can be found here: http://support.tp-link.com/f/83ec721f22/?dl=1.

    The beta firmware for Archer C1200 hardware version 2 can be found here: http://support.tp-link.com/f/afccc09878/?dl=1.

    Regarding firmware upgrade procedure:
    IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
    Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. Normally V1.x=V1
    Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
    Do NOT upgrade the firmware through wireless connection unless there is no LAN/Ethernet port on the TP-link device.

  15. #105
    I contact tplink tech support, they told me that there will be a official firmware for version 3.
    Quote Originally Posted by TXPearl View Post
    So what about V3? Is there a firmware update for V3 yet? Both V1 and V2 have official updates on the website, but nothing yet for V3.

    If it's forthcoming very soon, I'll wait. Otherwise, I need to move on with my life and replace these (I have two C1200 V3s).


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright © 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.