Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 3 of 3
  1. #1

    Wiring Question on Hs200

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hi all,

    Question, I bought a couple of the switches, HS200 and they wouldnt fit where I wanted them to go. Too much wire in the box behind them, they are large switches. So I found another location, its power, to switch to light to light to continuing power. A regular switch does work and turns the lights on and off. This switch, I can hear it switching when I turn it off or on both from touching it and using the Kasa app. Everything seems fine but it doesnt actually turn the lights off and on. Now since a regular light switch does turn the lights off and on I know its not the way its wired. I'm wondering if this switch wont work in this config. Below is a picture of how I wired the system up. Any suggestions to get the switch to turn the lights on and off?


    Name:  2-lights-1-switch.jpg
Views: 0
Size:  8.0 KB

  2. #2
    Members R1D2 is on a distinguished road
    Join Date
    Dec 2015
    Wrong forum. This forum is for Ethernet switches only. Try http://forum.tp-link.com/forumdispla...149-Smart-Plug, there you would probably get answers to questions related to smart plugs.

  3. #3
    Thanks. Sorry about that.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.