Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 3 of 3
  1. #1
    Junior Member amitshtc is on a distinguished road
    Join Date
    Oct 2017
    Posts
    1

    TL-WA7210N frequent disconnects

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    I have installed TL-WA7210N for indoor use and am using it as an AP.

    The problem is that the AP frequently stops responding and works only after its rebooted by turning power off and on.
    Again it works for few minutes and stops working again and the same reboot process needs to be repeated.

    I thought that this must be the problem with the particular unit and then changed it. However same problem is being
    encountered with another unit of same model.

    Can someone suggest a solution please??

  2. #2
    Quote Originally Posted by amitshtc View Post
    I have installed TL-WA7210N for indoor use and am using it as an AP.?
    TL-WA7210N is an outdoor AP. You should buy an indoor AP such as EAP110/EAP115 (2.4GHz only). For more details, please refer to TP-Link website: http://www.tp-link.com/en/products/biz-list-4908.html

  3. #3
    Members R1D2 is on a distinguished road
    Join Date
    Dec 2015
    Posts
    1,009
    Quote Originally Posted by amitshtc View Post
    The problem is that the AP frequently stops responding and works only after its rebooted by turning power off and on.
    To use a TL-WA7210 in indoor environments you would have to connect an omnidirectional antenna to its external antenna connector and turn off the built-in directional antennas.

    Do you use such an omni antenna?


 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.