Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1

    Exclamation TD-W8970_V1 Wake On LAN

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hi Mates,

    I'm trying to convince my TD8970 (V1) to pass the WOL magic packet to my host PC. The target PC wakes up when I send the packet from within my LAN, so it's correctly configured.

    I followed the guidelines provided by Ilkertr in this nice post: http://forum.tp-link.com/showthread....-over-Internet

    It still doesn't work, however.

    This is my config:

    Name:  Screenshot_20171009_063147.jpg
Views: 0
Size:  53.4 KBName:  Screenshot_20171009_063228.jpg
Views: 0
Size:  48.5 KB
    Name:  Screenshot_20171009_063311.jpg
Views: 0
Size:  55.3 KBName:  Screenshot_20171009_063336.jpg
Views: 0
Size:  45.3 KB

    Any suggestion? Thanks in advance!

  2. #2
    Guys, I think I nailed the problem. It's port forwarding that just doesn't work.

    I tried to forward other services, with no success. I even tried DMZ to utterly expose an entire host, but any packed and any port are filtered by the router.

    I tried to upgrade the firmware with the latest release, but again, no success.

    Any suggestion would really be appreciated: the router seems to be ok any other task, so I'm fairly convinced I'm doing something wrong.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.