Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Junior Member JimB is on a distinguished road
    Join Date
    Oct 2017
    Posts
    1

    RE305 and MAC Filtering

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    http://www.tp-link.com/us/faq-927.html

    The above link indicates it's possible with other extenders but my guess is that not the RE305 as there are no Operations Mode settings on this unit. If both the device MAC and the Wireless MAC are entered in the Router filtering table and then ENABLED, access to the Internet is lost. Once disabled, all is well again.

    Router is an Archer C7.

    Anyone ever run into this or have a solution to MAC Filtering an RE305?

    Thanks!

  2. #2
    The RE305 works at Proxy mode by default, so you need follow the steps of the Proxy mode part in that FAQ


 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.