Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 4 of 4
  1. #1

    re350 appears to be working but 2.4g led not lit up

    Model : RE350

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hello,

    I set up my re350 and all was working correctly but I needed to reset the device because I disabled a guest network on my router. So I reset the re350, used the tether app to set it up, it identified and mirrored both my 2.4 and 5 G networks. All my devices can connect to both the 2.4 and 5 G extended networks but the led on the front of the re350 is not lit, only the 5 G ledi s lit.

    What, if anything, is wrong?

    Thanks.

  2. #2
    Maybe the extender is not linked to your host 2.4G WiFi, but it must link to 5G successfully, that's why you can get internet access when connected the extended network on both 2.4G and 5G

  3. #3
    That's what I was thinking. Should I just reset to factory and set it up again?

  4. #4
    I think you can do that. Or use tether app to cofig the extender


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.