Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 3 of 3
  1. #1

    Cpu 90% form 1 Min cyclic

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    hello i have bought a t2600g-28ts, but i have a strange problem, when i connect this switch to our router( a mikrotik ccr) the switch cpu in a cyclic way go on 90% for about 1 min and then go down. like the image attached.

    i try to find the process that generate this problem but i cannot find how to see the cpu/process utilization.

    Please advice, because the switch not work well in this way.

    BR
    Attached Images  

  2. #2
    Members TPTHZ is on a distinguished road
    Join Date
    Aug 2017
    Posts
    103
    Quote Originally Posted by g.lopresti View Post
    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    hello i have bought a t2600g-28ts, but i have a strange problem, when i connect this switch to our router( a mikrotik ccr) the switch cpu in a cyclic way go on 90% for about 1 min and then go down. like the image attached.

    i try to find the process that generate this problem but i cannot find how to see the cpu/process utilization.

    Please advice, because the switch not work well in this way.

    BR
    Did you configure SNMP in T2600G-28TS? In my opinion, your router may getting some information from switch. I suggest you capture the packet, you will find the reason.

  3. #3
    hello,

    thanks for reply, unfortunately we have disabled snmp and the error continue......it is possible the switch is broken or something similar?

    BR


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.