Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Junior Member timg1993 is on a distinguished road
    Join Date
    Oct 2017

    CPE510 - failed to configure WLAN

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]


    i want to configure 2 CPE510, one as a access point and the other one as a client to connect 2 buildings. I used the quick setup as described in the manual but every time i finish the wizard there is the error: "Failed to configure WLAN"

    Name:  Capture+_2017-10-02-15-09-24.jpg
Views: 0
Size:  54.3 KB

    I patched both CPE510 with the current firmware TP_PharOS_2.1.0_170609 but it didn't change anything. The Error occurs on both CPE510.
    Is somebody here with an advice for me?

    Kind regards,


  2. #2
    Hi Tim,

    When you configure your CPE510, please use an Ethernet cable to connect your PC and the LAN port of each CPE510.
    Now reset them and do it again. Here are the detailed guides:
    Configure AP mode: http://www.tp-link.com/en/faq-730.html
    Configure Client mode: http://www.tp-link.com/en/faq-727.html


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.