Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 4 of 4
  1. #1

    Exclamation EAP 120: Windows 8 and 10 freeze after connection to the wifi (with EAP Controller)

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hi all.
    i have a problem.

    I have deployed 2 EAP 120 and i have updated the firmware to the (EU)_V1_160405 in order to use them with EAP controller.

    I'm experiencing since then some problems of deconnection of the Ap and problem in adopt.

    Recently, i was obliged to hard reset the AP.
    And after that, when computer with windows 8 and 10 try to connect to the wifi, they freeze (sometimes immediately, or after a moment).
    The computers under windows 7 are not involved.

    Here is a brief detail about the architecture:
    - Acces points firmware:
    - EAP controller version: 2.4.7
    - Presence of router: Yes (TP Link WR940 N) which is DHCP server
    - Additional information: use of MAC filtering

    Hop that you could help me to solve this problem....
    It is a little urgent for me.

    Thanks a lot

  2. #2
    Ok. Thank you for sharing

  3. #3
    Hello all....

    I have done an upgrade of the two EAP 120 but it didn't work.

    Anyone have an answer to me??


  4. #4
    There is a more recent version of firmware EAP120(EU)_V1_170113 available at http://www.tp-link.com/en/download/EAP120.html#Firmware. Maybe you should try this one then.

    Also, please upgrade EAP Controller as well to EAP_Controller_V2.4.8_Windows http://www.tp-link.com/en/download/E...oller_Software.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.