Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 6 of 6
  1. #1

    Exclamation Archer T4UH v1 Windows 10 driver super buggy

    Model : T4UH AC1200

    Hardware Version : Version 1

    Firmware Version : 151201 (Latest Windows 10 driver, released in 2015)

    ISP : Comcast

    Name:  Capture2.PNG
Views: 0
Size:  31.0 KBName:  Capture.PNG
Views: 0
Size:  11.9 KB

    The driver takes up 7 gigabytes. The adapter shows up as an 802.11n adapter even though the speeds are higher than 802.11n speeds in network and sharing center. What's up???
    Last edited by johnb_xp; 09-30-2017 at 02:03.

  2. #2
    My Archer T2U has exactly the same issue. It seems to be the display problem, the speed is good, so it should be 11ac, not sure why, but it should be OK just display wrongly.

  3. #3
    Attachment 6109


    Quick update, I removed and reinstalled the driver and the size increased to 12.5 Gigabytes!! Woop woop!

  4. #4
    Mh. I currently get no fast connection with my Archer T4U v2. The TP Link's website driver seems to be buggy / not working on Windows 10. I have only 1-3Mbit connection speed (measured through a speedtest).

  5. #5
    maybe you can try the same way like Johnb did

  6. #6
    Are you plugged into a USB 2.0 port? Adapter will be slower unless it's in a USB 3/SS (usually blue) port. The driver works fine for me, just has an ENORMOUS file size. Since you're in Windows 10 you can go into PC settings and reset them too. Might fix it.


 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.