Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 6 of 6
  1. #1

    PC interface for NC450 HD Pan/Tilt Camera ??

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Is there a PC (Windows) based interface for the NC450 HD Pan/Tilt Camera available

    thanks , royjh

  2. #2
    There is SD Card settings under Advanced settings of the camera's interface. I found it from their emulator http://www.tp-link.com/resources/sim...tor/index.html

    You can log into your camera's web interface to have a look. http://www.tp-link.sg/faq-817.html

  3. #3
    Thanks Kevin. That is some help...I find the setup direction quite confusing needing multiple usernames and logins. It would be good if TP_LINK developed a direct Camera-PC control interface using home wireless LAN in addition to the cloud connection. Surely there is a simpler way!

  4. #4
    Hi - I tried to enter the NC450 default username and password into the web page for the camera IP and it says the username does not exist and/or password is incorrect. It should be the default as I have never accessed that page before...Can anyone help me get this sorted?

  5. #5
    Did you configure the camera through the app already? When you added the camera to the app the first time, it would ask you to create a username and password for the camera. Should use that to login.

  6. #6
    The app did not ask for username/pwd. It was set up initially in local mode. I am not sure how to setup in the global mode again?? The documentation is somewhat out of date and confusing as it refers to PC based software in the installation guide.


 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.