Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Junior Member raday is on a distinguished road
    Join Date
    Sep 2017
    Posts
    2

    problem with re200 extender

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    hi,

    at the end of the extender's configuration, in the "quick setup wizard, instead of restarting it stucks in 100% and don't continue.. so i cant activate the extender.

    what can i do to solve this?

    thanks

  2. #2
    When it goes to 100%, it means the Quick Setup has finished, and the wifi of the extender will be changed to your router's name, which means the connection between your computer and the extender is shut down, this page cannot be reached anymore.
    So when it goes to 100%, just need to check the lights on the extender, if the light for 2.4G or 5G is green, then it means it has been connected to the router successfully. And you can unplug it and use it in somewhere else.


 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.