Model :

Hardware Version :

Firmware Version :


i have a Problem with configuring LACP between two Switches. On the T3700G i have configured a LACP for two Ports as passive in General Mode with PVID 666 ( my Management-Network is Vlan 666 ). Here on the T3700g i can put any other configured VLAN as tagged VLAN on the configured LAG
On the T2600G i have configured allways a LACP over 2 Ports as Active in General Mode with PVID 666. When i will put any other configured Vlan ( for example Vlan100 for the LAN-Vlan ) to the LAG i allways can do this in untagged mode, so this is not correct.
Kind Regards