Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1
    Junior Member mknasiak is on a distinguished road
    Join Date
    Sep 2017

    AC1200 Wi-Fi Range Extender RE305 not connecting to 5ghz after setup

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    I did the quick-setup on my AC1200 Wi-Fi Range Extender RE305 via the web interface. It found both 2.4Ghz and 5Ghz frequencies on the host network. However, after saving to apply settings and reboot the extender the 5Ghz light is off on the extender and the Status tab on the extender web interface shows "No Signal" under "5Ghz Wireless".

    5Ghz on the host network is working fine, I double checked by connecting with my Macbook. The host router is a Netgear WNDR3300. Under wireless settings of the router the "Mode" is set to "Up to 270Mbps at 5Ghz & 54Mbps at 2.4Ghz". "11N Channel" is set to "149/5.745Ghz", "11G Channel" is set to "auto". I also tried setting "11N Channel" to "44/5.220Ghz" but that didn't work either.

    Any idea why the extender won't connect to the host network on 5Ghz after rebooting? It seems to find it fine during setup.

    Any troubleshooting steps I should try before I RMA this thing?

    Appreciate any help. Thanks.

  2. #2
    Junior Member rruval007 is on a distinguished road
    Join Date
    Sep 2017
    I just received my RE305 and cannot connect to 5Ghz either.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.