Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 2 of 2
  1. #1

    TDW8968 Remote web interface and also web servers both accessible

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    I have setup a virtual server in our TD-W8968
    external port 8080 tcp/udp to internal port 80 to server address
    That internal address is for an IP phone. And it works, I can get to the IP phones web interface. Great i thought.
    The problem is that, i cant seem to access the main web management interface for the

    I want to be able to access the
    TD-W8968 web management interface remotely, as I will want to make changes in the future. But I also want to be able to access the webserver/IP phone.

    Can someone advise on how to do this? Where I have gone wrong?

    Thank you

  2. #2
    Make sur you have enabled the remote management fo rthe 8968 modem. http://www.tp-link.com/en/faq-308.html
    the remote management interface of the modem is also using port 80. So when you access remotely with WAN IP:8080 it should direct to IP phone, while WAN IP: 80 should be the modem.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.