Welcome to TP-LINK Tech Support Forum
+ Reply to Thread
Results 1 to 3 of 3
  1. #1
    Junior Member maldoror68 is on a distinguished road
    Join Date
    Sep 2017
    Posts
    1

    TL-PA4015PKIT - PLC frequency ?

    Model :

    Hardware Version :

    Firmware Version :

    ISP : [/COLOR]

    Hi, i can not find the hardware specs or datasheet of the product that tells mes whats range of PLC frequency is used by this pair of plugs.

    can someone give me the used frequency ?


    here in france, the national electric company will force us to change the electric metter everywhere in every house, and the new "system" uses PLC to send data to the electricity supplier

    so i fear that the frequency used by the elctricity company device (named linky) can make some conflict inside my house with my TP-LINK products and maybe totally downgrade or cause interferences in my (complex) wifi / plc / internet setup

    here is the frequency of the "linky" electric meter PLC : from 35,9 kHz to 90,6 kHz, given by an independant agency :
    (source http://www.anfr.fr/fileadmin/mediatheque/documents/expace/2016-05-30_Rapport_technique_compteur_vdef2.pdf )

    please confirm the frequency range of the TL-PA4015PKIT, thanks
    sorry for my bad english


  2. #2
    I happen to know it. The Frequency Range of TL-PA4015PKIT is 2MHz - 67.5MHz.

  3. #3
    To be more general :
    .every "HomePlug AV" PLC use 2-28 Mhz (rounded) Frequency Range, with some exceptions going to 50 Mhz.
    .every "HomePlug AV 2" PLC use 2-68 Mhz (rounded) Frequency Range, with some exceptions going to 86 Mhz.

    There are notches (frequencies that are very attenuated) in this range in order to comply with other usages (amateur radio for example). They are defined in local regulations (In Europe see EN50561-1 for <30 Mhz and EN50561-3 for >30Mhz).
    That's why you can see in the release note of your PLC firmware something like"Opening the function of EN50561".

    Linky is another beast, it uses narrow-band PLC (CPL basse-fréquence) : less throughput, longer distance (like FM vs SW radio if you want a bad analogy).

    On a side note, there is some known interferences between PLCs and VDSL2, but these are mostly (not always) seen in a Vectored VDSL2, which is not approved for use in France by ARCEP. Recent versions of tpPLC utility have an option to reduce these crosstalk interferences, at the cost of reduced speed between PLCs (no MIMO), but this should not apply to a 4-series PLC (SISO).
    Last edited by shroeder; 09-04-2017 at 10:16.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Copyright © 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.