Welcome to TP-LINK Tech Support Forum

Search:

Type: Posts; User: R1D2

Page 1 of 5 1 2 3 4

Search: Search took 0.02 seconds; generated 9 minute(s) ago.

  1. TL-SG108E hardware version 1 did not offer a web...

    TL-SG108E hardware version 1 did not offer a web UI, so you could manage it through the Easy Smart Configuration Utility only. Starting with hardware version 2 the switch offers a web UI.

    Using...
  2. Thread: AC1200 Archer C9

    by R1D2
    Replies
    3
    Views
    4

    An EAP is an access point and can't extend a...

    An EAP is an access point and can't extend a wireless signal wirelessly. It can extend wireless coverage by connecting it to your Archer C9 by cable. Just set up the same SSID as on the Archer and...
  3. Replies
    1
    Views
    2

    No. Alls EAPs are just access points and as such...

    No. Alls EAPs are just access points and as such can't be used as range extenders/repeaters. This also applies to EAP110-Outdoor.



    They can run in standalone mode without an EAP controller, but...
  4. Thread: ips

    by R1D2
    Replies
    3
    Views
    4

    Could be DHCP in your network in combination with...

    Could be DHCP in your network in combination with Windows "magic" way of doing things.

    Connect the WBS510 directly to your PC, not to a router or switch of your network. Make sure to disable your...
  5. You're welcome. To clarify the need for using...

    You're welcome.

    To clarify the need for using 192.168.0.x subnet: It needs to be used just once for initial configuration of a CPE. In order to set a customized IP for the CPE you must use the...
  6. From a technical point of view there is not much...

    From a technical point of view there is not much difference between client mode and bridge/repeater modes except that client mode bridges two wired networks over a wireless link, while...
  7. Sure it is, see "Modifications and Bug Fixes" on...

    Sure it is, see "Modifications and Bug Fixes" on page http://www.tp-link.com/us/download/CPE210.html#Firmware.

    Firmware 2.1.6 works stable with my Pharos devices.
  8. Replies
    15
    Views
    16

    Client mode greatly improves the throughput of...

    Client mode greatly improves the throughput of the radio link. As for the cable, make sure it provides proper grounding if the pole isn't grounded itself.
  9. Thread: Adopt timeout

    by R1D2
    Replies
    1
    Views
    2

    No. Adopting works over NAT, too. Make sure...

    No. Adopting works over NAT, too.

    Make sure you specify the correct username/password of the EAPs manually in the Controller if you changed them through the web UI, otherwise it will try to use...
  10. Replies
    3
    Views
    4

    View Post

    Kein Grund sich zu schämen, Fehler passieren auch dem besten Experten. Bezüglich TxPower: über so kurze Entfernungen habe ich das nicht ausgetestet, aber es ist recht einfach zu ermitteln: dazu...
  11. Yes, you could mount it vertically, too.

    Yes, you could mount it vertically, too.
  12. Yes. EAP225 max. power consumption is 10.15W,...

    Yes. EAP225 max. power consumption is 10.15W, TL-SG1008P can provide 15W per port, 55W for all four PoE ports.



    Sure.



    TIA-568A or TIA-568B, doesn't matter. Make sure to use good quality...
  13. Replies
    3
    Views
    4

    No, it means that you should replace the CPE by...

    No, it means that you should replace the CPE by an EAP110-Outdoor if you only need to feed clients and have a wired Internet connection to the AP.
  14. Here you can download firmware v1.33 P9 beta...

    Here you can download firmware v1.33 P9 beta (adds RADIUS authentication) dated 2016/07/13:
    ...
  15. I would suggested two CPEs for the 1km distance....

    I would suggested two CPEs for the 1km distance. If the coverage in front is inside the 65° angle, you could also use one of those CPEs to cover connections in front. But 70 networks will...
  16. Replies
    3
    Views
    4

    View Post

    Klar kannst Du die Geräte so testen, mache ich auch vor der endgültigen Installation. Es wäre natürlich heftig, wenn es Inkompatibilitäten gäbe zwischen v1.1 und v2; konnte ich noch nicht testen, da...
  17. Sent you a PM, see your inbox.

    Sent you a PM, see your inbox.
  18. It's one alternative if you need any special...

    It's one alternative if you need any special authentication scheme.



    Didn't try this, I don't need nor use FaCIAbook. :)
  19. "Users" are clients before authentication or...

    "Users" are clients before authentication or users using the free user's policy. "Guests" are clients after authentication even if authentication mode is "No authentication".

    As for your question...
  20. Tammy007, Debian is the base for Ubuntu and EAP...

    Tammy007, Debian is the base for Ubuntu and EAP Controller runs fine on Debian (and other derivates based on Debian) including the display of the correct client count.

    E-raser, do you run the...
  21. Only LEDE/OpenWRT developers can tell what they...

    Only LEDE/OpenWRT developers can tell what they changed what prevents the boot loader from re-installing the original firmware in recovery mode.
  22. I'm not from TP-Link, I am just a user like you...

    I'm not from TP-Link, I am just a user like you are. Take a look at TL-SG2008. It is a smart switch (without "easy"), which offers 512 VLANs out of 4k. Nice switch, I use it, too.
  23. Replies
    2
    Views
    3

    No, not possible usings ACLs. AC50 uses VLANs for...

    No, not possible usings ACLs. AC50 uses VLANs for isolating user groups. But you could terminate the VLANs in a managed switch and connect either two routers or one router with a separate guest...
  24. Thread: EAP225 vs EAP320

    by R1D2
    Replies
    1
    Views
    2

    EAP 330 has more powerful antennas (3x 6dBi...

    EAP 330 has more powerful antennas (3x 6dBi @2.4GHz, 3x 7dBi @5GHz) than EAP225, faster wireless speed (AC1900), two Gigabit Ethernet interfaces and software features like AirTime fairness and...
  25. For trunk ports you need to configure their VLAN...

    For trunk ports you need to configure their VLAN membership on the TL-SG105E. The trunk ports forwards only those Ethernet frames tagged with a VLAN ID these ports are a member of. This means you are...
Results 1 to 25 of 117
Page 1 of 5 1 2 3 4

Copyright © 1996-2018 TP-LINK Technologies Co., Ltd. All rights reserved.