Welcome to TP-LINK Tech Support Forum

Search:

Type: Posts; User: R1D2

Page 1 of 5 1 2 3 4

Search: Search took 0.01 seconds; generated 7 minute(s) ago.

  1. Thread: CPE210 unreliable

    by R1D2
    Replies
    10
    Views
    11

    Ok, now it's clearer. First of all, update the...

    Ok, now it's clearer. First of all, update the firmware of the CPE210 v2. Latest firmware is TP_PharOS_V2.1.0_170609. I assume you are in the EU? If so, you can download from here (else see your...
  2. Replies
    1
    Views
    2

    Generally, 1000BASE-X SFPs should work in a SFP+...

    Generally, 1000BASE-X SFPs should work in a SFP+ port. Since SFP+ GBICs can't work with 1000BASE-X SFP GBICs on the other side of the fiber, the T1700G's SFP+ port must support SFP GBICs, too, since...
  3. 1. Do a factory reset on the switch. 2. Set your...

    1. Do a factory reset on the switch.
    2. Set your PC to the subnet 192.168.0.0 (e.g. set fixed IP 192.168.0.20).
    3. Start a browser (Firefox, Chrome, Opera). Clear the browser's cache.
    4. Load the...
  4. Thread: CPE210 unreliable

    by R1D2
    Replies
    10
    Views
    11

    To clarify: you have an AP (device #1) connected...

    To clarify: you have an AP (device #1) connected over WiFi with a client (device #2) and if you disable the WiFi link, you can't ping device #1 from your PC over the LAN of #1 anymore, correct?
    ...
  5. Replies
    2
    Views
    3

    Don't buy the whole equipment w/o having tested...

    Don't buy the whole equipment w/o having tested beforehand! Get an EAP110-Outdoor from Amazon for testing, you can send it back if it does not fit your needs.

    As for iperf rates in...
  6. If the flash memory is faulty, it will not save...

    If the flash memory is faulty, it will not save the config and you will have the same settings as on factory reset after a reboot - without needing to reset it.

    Post a screenshot of the network...
  7. Wireless roaming is part of the WiFi negotiation...

    Wireless roaming is part of the WiFi negotiation process described in IEEE 802.11. It's so self-evident that you won't find much about it on the Web.

    RE your question: no, there are no other...
  8. Thread: CPE210 unreliable

    by R1D2
    Replies
    10
    Views
    11

    Just for the record: still running, still...

    Just for the record: still running, still reachable.

    6010
  9. Yes, I can understand, but I cannot reproduce...

    Yes, I can understand, but I cannot reproduce this behavior.

    Make sure you "Save Changes" after "Applying" any settings. Set a static IP for the CPE, then "Apply", then "Save Changes".

    Next,...
  10. Replies
    13
    Views
    14

    You're welcome. If you have deployed the...

    You're welcome.

    If you have deployed the network, please let the forum know wether it worked out for you.

    Have fun!
  11. Replies
    13
    Views
    14

    Are you using CPE210 for the directional link?...

    Are you using CPE210 for the directional link? Wouldn't recommend this. Use CPE510 instead.

    CPE210's directional antennas have a beam width of 65° (H plane) / 35° (E plane), not well suited for...
  12. Thread: CPE210 unreliable

    by R1D2
    Replies
    10
    Views
    11

    What HW version has the CPE210? What kind of LAN...

    What HW version has the CPE210? What kind of LAN setup do you use? DHCP? Static IP? PC's network settings correct?

    I did set up a CPE210 v1, firmware version 2.1.0, wireless adapter disabled....
  13. Not sure what you mean. Of course, if you...

    Not sure what you mean. Of course, if you disconnect the CPE510 from your LAN or turn off the power you can't connect to the CPE anymore. If you indeed mean that after powering on the CPE again or...
  14. Thread: Firmware cpe210

    by R1D2
    Replies
    15
    Views
    16

    View Post

    Eso es genial, a continuación, tratar de obtener un CPE220. Tiene una antena de 12dBi y se puede establecer a 30dBm TX de potencia, lo que le da 42 dBm en total. Eso es 40 vatios, suficiente para...
  15. Replies
    5
    Views
    6

    You did read that the thread opener fixed his...

    You did read that the thread opener fixed his problem? Although most certainly unrelated to the hick-ups your browser/setup/config causes, the latest software for the TL-SG108E is a beta from...
  16. It makes not much sense to compile SW for tiny...

    It makes not much sense to compile SW for tiny SoC boards if the boards don't meet all other requirements to run the controller.
  17. Replies
    4
    Views
    5

    Make sure that the SmartPhone doesn't fall back...

    Make sure that the SmartPhone doesn't fall back to a known SSID if it detects no Internet connection immediately with the guest SSID. SmartPhones want to be "smart" and do such stupid things (for...
  18. Replies
    13
    Views
    14

    Unfortunately there are no antenna patterns...

    Unfortunately there are no antenna patterns published for EAP110-Outdoor, but we cover a RV park with one CPE510/EAP110-Outdoor combination on the roof of a 2-story building (about 8-9 meter height)...
  19. Thread: Firmware cpe210

    by R1D2
    Replies
    15
    Views
    16

    Hola, no hay problema, ni siquiera soy bueno en...

    Hola, no hay problema, ni siquiera soy bueno en Google translate. ;) Es una broma.


    ¿En qué país vives? Por lo que sé, en algunas partes de América Latina se permiten hasta 1.000 mW (@ 2.4 GHz)...
  20. Replies
    13
    Views
    14

    Oh, buy your kids an ice cream instead and enjoy...

    Oh, buy your kids an ice cream instead and enjoy their smile. :D



    Yes, I would do it this way (but before doing final installation test it!):

    6002


    Probably you don't need to mount the...
  21. Replies
    2
    Views
    3

    Right, it's a SOHO device, but also an...

    Right, it's a SOHO device, but also an entry-level device to the world of manageable switches. First lesson to learn for SOHO users operating a managed switch: get your IP right. ;) As Panda wrote:...
  22. Replies
    13
    Views
    14

    Yes. The WBS/CPEs have a data throughput of max....

    Yes. The WBS/CPEs have a data throughput of max. 100 Mbit/s (due to the Fast Ethernet IF) over the air. Wireless frames travel with up to 300 Mbit/s between the devices. Using three pairs for each...
  23. Thread: Firmware cpe210

    by R1D2
    Replies
    15
    Views
    16

    Carat1, IMHO it's worth to note that increasing...

    Carat1, IMHO it's worth to note that increasing TX power most often doesn't has any advantage, but rather has the dis-advantage of overdriving the receiver's radio on relatively short distance,...
  24. Console cables are available at each professional...

    Console cables are available at each professional shop selling business class switches and you even find those on Amazon for 5 Euros/dollars.



    Yes, that's common standard in the industry if an...
  25. Replies
    13
    Views
    14

    Yes, definitely. We use those devices for CCTV...

    Yes, definitely. We use those devices for CCTV installations, too.



    For option 1) WBS210 with new antenna TL-ANT2410MO (coming soon) for omnidirectional coverage or EAP110-Outdoor if you don't...
Results 1 to 25 of 119
Page 1 of 5 1 2 3 4

Copyright © 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.