Welcome to TP-LINK Tech Support Forum

Search:

Type: Posts; User: Victor Ramos

Page 1 of 5 1 2 3 4

Search: Search took 0.01 seconds; generated 43 minute(s) ago.

  1. Unfortunately, having changed brands we can not...

    Unfortunately, having changed brands we can not give you support since the questions regarding UBNT (nanostat) should be made in the Ubiquiti forum ...



    Now, on the other hand, according to...
  2. Thread: Cpe 210

    by Victor Ramos
    Replies
    3
    Views
    4

    The connection deployment is simple, see the...

    The connection deployment is simple, see the attached photo below, but if you have doubts, refer to the quick setup inside the product box ...


    Here a link to an article in the knowledge base,...
  3. You are in error ... a CPE is of the model that...

    You are in error ... a CPE is of the model that is, and whatever the brand is, is designed to be used outdoors due to its power and directionality ... the WiFi signal is able to traverse only a...
  4. Thread: Cpe 210

    by Victor Ramos
    Replies
    3
    Views
    4

    yes.... regards...

    yes....

    regards...
  5. DHCP = Start 192.168.0.150... end 192.168.0.200 ...

    DHCP = Start 192.168.0.150... end 192.168.0.200

    CPE IP = out of 192.168.0.150 to 192.168.0.200.... Maybe have minor to 192.168.0.150 or high 192.168.0.250... an not have the ip main router...
  6. Must deal with the 210 without DHCP (off) ...,...

    Must deal with the 210 without DHCP (off) ..., all ip address management should make them the main router ...

    By the way, I do not know the ip gateway of the modem that it uses ... but the cpe...
  7. There are many factors that influence the quality...

    There are many factors that influence the quality / stability of a wireless link ... starting from the basic alignment, LoS, Fresnel, Electromagnetic noise, distance / power settings, type / length...
  8. Should see the capacity of the connection, ie how...

    Should see the capacity of the connection, ie how many db has, ideally 30dB, up to 20dB is optimal signal to establish a decent connection ...

    Now must consider the electromagnetic noise factor...
  9. MaxStream is a proprietary protocol of TP-LINK...

    MaxStream is a proprietary protocol of TP-LINK used to work in environments with excessive noise, and helps to immunize the interference caused by other signals in the environment ... and ensures...
  10. What I mention is strange ... but I would not be...

    What I mention is strange ... but I would not be surprised by the working mode in which the CPE is configured ... Client mode, each device will be masked with the mac address of the CPE, so in the...
  11. Technically if more stations appear with the...

    Technically if more stations appear with the same MAC address, it is usually due to which more devices are connecting from that station, and all come out with the device masking station ......
  12. Replies
    2
    Views
    3

    yes... is possible... but need a pigtail cable......

    yes... is possible... but need a pigtail cable... and specify the frecuency to usage...

    Regards...
  13. Affirmative... Regards...

    Affirmative...

    Regards...
  14. Thread: simeon

    by Victor Ramos
    Replies
    3
    Views
    4

    Maybe because the CPE510 is a 5.8GHz device, and...

    Maybe because the CPE510 is a 5.8GHz device, and if your laptop detects it is because it has a dual or dual band wireless card (5.8 GHz and 2.4 GHz), in the case of most devices, the Incorporation...
  15. I also had problems with these devices, one or...

    I also had problems with these devices, one or both of them, they stopped responding and had to restart them ... it did not matter the way of working .... nor did they update the firmware, always...
  16. Replies
    7
    Views
    8

    You could help by remote assistance, as long as...

    You could help by remote assistance, as long as you have internet at home ... another thing is the time difference ... in which part is located that rainforest ???

    You could try to contact me...
  17. Replies
    4
    Views
    5

    Perfect ... I could do two things ... 1.- get...

    Perfect ... I could do two things ...

    1.- get a network card dual wirelees ... or

    2.- according to the work to be done you could use TL-WA5210G, TL-wa7210N, CPE210, CPE220 or WBS210 ...

    The...
  18. Replies
    4
    Views
    5

    The problem may be due to: 1.- tl-wa7510n 5.8...

    The problem may be due to:

    1.- tl-wa7510n 5.8 GHz, you are trying to detect it with 2.4GHz devices, you will not be able to do it ...

    2.- tl-wa7510n, applying the search of the device, does not...
  19. The angle of radiation for this devices Is only...

    The angle of radiation for this devices Is only 30 degres... Your connection Is no posible.... Yo need usses 4 devices, no 3... Should install in the middle in the B point 2 devices...Should as point...
  20. Do not forget also if the other two points are...

    Do not forget also if the other two points are within the coverage area of the first point ... heights, if there are obstacles in the path and any information that can be useful ...

    regards...
  21. Replies
    5
    Views
    6

    The connection will become very unstable, in...

    The connection will become very unstable, in other cases could not connect, the maximum that could obstruct the line of sight is 60% of the first zone fresnel, and that compromising the...
  22. The majority of devices with integrated wifi...

    The majority of devices with integrated wifi only support 2.4GHz channels ..., the CPE510 is a 5.8GHz radio, the reason that the iPhone can only "see" the SSID is that the iPhpne brings dual radio...
  23. Que distancia deseas cubrir hacia tu lado.... No...

    Que distancia deseas cubrir hacia tu lado.... No hacia el hotspot... Y qué tipo de equipos vas a conectar... Es para conexión de exterior o todo es dentro d casa....Saludos....PD... Es un foro en...
  24. use two devices... one as client, conected to...

    use two devices... one as client, conected to main signal, and other as access point, to conect other devices...

    other case, is impossible, no is posible use both antenas same time

    in other...
  25. Replies
    9
    Views
    10

    As said @danymarc, it is impossible with the...

    As said @danymarc, it is impossible with the equipment that has, can get a good link and stable ... is the N-LoS effect the devices detect the AP equipment, they can connect, sometimes with good...
Results 1 to 25 of 105
Page 1 of 5 1 2 3 4

Copyright © 1996-2017 TP-LINK Technologies Co., Ltd. All rights reserved.